SparkMaker SparkMaker

SparkMaker #0

Properties

Build Volume 98 x 55 x 125 mm
Layer Resolution X 100 microns
Layer Resolution Y 100 microns
Layer Resolution Z 20 microns
Layer Resolution Low 100 micron (0.004 in.)
Layer Resolution High 20 microns
Print Speed Min. 5 mm/s
Print Speed Max. 15 mm/s

Документация

ПроизводительSparkMaker
Тип оборудования 3D Printer
Технология Прямая УФ-печать (DUP)
Материалы Resin (Фотополимерная смола), Castable Resin, Гибкая фотополимерная смола , Керамическая смола
Веб-сайтhttps://www.sparkmaker3d.com/
Средняя цена 249,00 $

О SparkMaker

SparkMaker is a resin printer, which was successfully funded through Kickstarter. It uses an LCD screen to cure the resin. The printer is ready-to-use from the box. It had been mentioned numerous times as one of the most affordable resin printers on the market as well as an easy to use the machine. Sparkmaker comes with its own slicing software and allows to use of third-party resins.

Features:

  • SD card connectivity
  • Comes assembled
  • LED light for process monitoring
  • 1/128 microstep stepper motor
  • Slicing software
  • Allows third-party resins

Продукция 3D печати, изготовленная с использованием SparkMaker

left.jpgright.jpgfront.jpg20170502_014643.jpg20170502_014754.jpg20170502_014726.jpg20170502_014659.jpg20170502_014737.jpg