RepRap Rostock

Rostock #0Rostock #1Rostock #2Rostock #3

Properties

Build Volume 141 x 141 x 400 mm (5.5 x 5.5 x 16 in.)
Layer Resolution Low 200 micron (0.008 in.)
Layer Resolution High 100 micron (0.004 in.)

Документация

ПроизводительRepRap
Тип оборудования 3D Printer
Технология Моделирование методом послойного наплавления (FDM)
Материалы PLA, Wood PLA, Термохромный пластик, PETG, PLA+, ColorFabb XT CF20 (PET-G), Foaming PLA
Веб-сайтhttp://reprap.org/wiki/Rostock
Средняя цена Связаться с изготовителем

О Rostock

Rostock is a linear delta robot 3D printer prototype, built in 2012 by Johann in Seattle, USA.

Features:

  • Build volume: 200x200x400 mm (8x8x16 inches).
  • Footprint: 300x350 mm (12x14 inches).
  • Print surface: 200x200 mm heated glass which never moves.
  • Mass of end effector with hotend: less than 50 grams.
  • Positioning speed: up to 800 mm/s in all 3 directions.
  • Positioning accuracy: at least 30 steps/mm in all 3 directions.
  • Simplicity: fewer than 200 parts.
  • Hardware cost: less than $500 USD.