3DiY BiZon Prusa i3 Steel

BiZon Prusa i3 Steel #0BiZon Prusa i3 Steel #1BiZon Prusa i3 Steel #2BiZon Prusa i3 Steel #3

Properties

Build Volume 300 х 300 х 340 mm (11.8 x 11.8 x 13.4 in.)
Layer Resolution Low 200 micron (0.008 in.)
Layer Resolution High 100 micron (0.004 in.)
Производитель3DiY
Тип оборудования 3D Printer
Технология Моделирование методом послойного наплавления (FDM)
Материалы PVA, PLA, ABS, HIPS, Эластичный пластик (FLEX)
Веб-сайтhttp://3d-diy.ru/shop/246/desc/bizon-prusa-i3-steel-diy
Средняя цена 690,00 $

О BiZon Prusa i3 Steel

BiZon Prusa i3 Steel is the Prusa i3 Steel version with an enlarged 300x300x340 mm print area. A set for self-assembly. From its predecessors from the Prusa family, this 3D printer features a HARD STEEL HULL with reinforced ribs, an expanded print area, the ability to print various materials - ABS, PLA, HIPS, FLEX, PVA.

 

ВiZon P3Steel with dimensions 510х560х580 mm has a large construction area - 300х300х340 mm, which makes it the best option for personal use and small-scale production. The body design does not use studs or plastic parts - everything is made of steel. For greater rigidity, the construction uses 10mm shafts. This model provides reliability, quality and high speed printing.
 

SPECIFICATIONS


Dimensions:

  • Dimensions of the printer: 510х560х580 mm (with coil 510х560х740 mm)
  • Weight: 15.5 kg


Printing options:

  • Printing technology: FDM (Fused Deposition Modeling)
  • Printing area: 300x300x340 mm
  • Layer height: minimum 50 microns (with nozzle 0.2-0.3 mm), optimal 150-200 microns, maximum 0.6 mm (with nozzle 0.8 mm)
  • Print speed: recommended 30 mm / s, maximum recommended 100 mm / s
  • Material used: ABS, PLA, HIPS, FLEX, RUBBER (Thread diameter 1.75 mm)
  • Heated platform: maximum temperature 120 0С

 

Electronics:

  • MKS Gen V1.4
  • LCD display with SD card reader and control button
  • Power supply 400 W, 12 V 
  • Heating table 328x328 mm


Software:

  • firmware: Marlin
  • Software: Repetier-Host, Slic3r, Cura
  • Compatible with OS: Windows, Mac OS, Linux


Extruder parameters:

  • Diameter of the nozzle: 0.4 mm (0.2-0.8 mm)
  • Thread diameter: 1.75 mm
  • Number of heads: 1 

 

EQUIPMENT


Electronics:

  • MKS Gen V1.4 (1 piece)
  • LCD display (1pcs)
  • USB cable (1 piece)
  • driver stepper motor A4988 (5 pcs)
  • stepper motor Nema 17 (4 pcs)
  • extruder assembly (1 piece)
  • mechanical limit switch (3 pcs)
  • power supply 12 V (1 pc)
  • heating table (1 piece)
  • NTC thermistor 100 kΩ 3950 for heating table (1 pc)
  • fan (blowing Hot-End 30x30, blowing out boards 40x40) (2 pcs)
  • wires "papa-mama" for elongation-connection of engines, thermistors, limiters with RAMPS 1.4 (20 pcs)
  • power cable 220V (1 piece)
  • power connector with a button (1 pc)
     

Mechanics:

  • set of body parts (steel 3mm, painted black)
  • set of polished shafts with a diameter of 10 mm
  • transfer screw-nut M5 (movement along the Z-axis) (2 pcs)
  • set of nuts, screws, washers, springs
  • connection sleeve 5x5 mm (2 pcs)
  • linear bearing lm10uu (11 pcs)
  • bearing 608ZZ (2 pieces)
  • bearing 625ZZ (2 pieces)
  • Toothed belt GT-2 (2 pcs)
  • toothed pulley GT-2 (2 pcs)
  • braid for wires (2 pcs)
  • mirror for the heating table (1 pc)
  • clamps for mirrors (6 pcs)