WALLY - Wall Plate Customizer から Ray_3dstl

モデル制作者
loading...
Model Description
3D model of thenewhobbyist
The models were repaired and checked for printability.

CUSTOMIZER CHALLENGE CONTEST WINNER - Useful Category

Update v1.3: Added 3 plate...さらに表示 sizes "Standard", "Junior-Jumbo", and "Jumbo". If you've got a larger hole in your wall these may help.

So here it is, my first model designed in OpenSCAD. I found something that would really benefit from being a parametrically designed model: Wall Plates. I've created a OpenSCAD model that allows you to pick from a list of 18 types of connector/outlet style which then generates a 3D model correctly oriented and modeled to be immediately 3D printed.

So what options did I include in this file? Well I’ve allowed the user to pick any width from 1 to 5 “plates” wide. These were measured off the standard electrical box sizes and should match screw holes in your existing boxes. The list of available plug and outlet styles is listed below:

Blank Port
Toggle Switch (Takes up entire plate)
Duplex Outlet (Takes up entire plate)
Rocker/Designer Plate (Takes up entire plate)
Keystone Jack
VGA Port
HDMI Port
DVI-I Port
Displayport
Cat5e/Cat6 Port
USB-A Port
USB-B Port
Firewire IEEE 1394 Port
DB-09 Port
PS2 Port
F-Type/Coaxial Port
S-Video Port
Stereo Headphone Jack
With the exception of #2-4 all of the plug types are modular and be placed on the top, bottom, or centered on a generated wall plate. All of the ports (excluding the outlets and keystone jacks) are designed to accommodate DataPro.net’s panel-mount cables.

I asked a Mathlete friend of mine if he could calculate the possible number of plug and plate combinations and well, the number is big, real big. He estimates that you can generate a total of 850,789,801,599 possible permutations.

1. Open WALLY in Customizer by clicking "Open in Customizer"
2. Pick your plate width
3. Select the plugs or full plates options to fit your needs.
Note: Three of the plug types fill the entire faceplate (Toggle Switch, Rocker/Designer, and Duplex Outlet) selecting one of these will ignore any option set in the bottom hole of that plate.

1. Print
2. Install your customized wall plate
http://twitter.com/TheNewHobbyist
モデル制作者について
106 models uploaded
承認されたプロフィール