3D model of francfalco
The models were repaired and checked for printability.
Band saw boxes are boxes made out of wood using only a bandsaw for cutting them out.
...Показать больше
The wood may be a solid block, a laminated block or a log from the woodpile. Whereas most boxes have straight sides and square corners, band saw boxes have virtually no restrictions as to shape.
I've just discovered this style of box and thought it would be great to create a 3D printable version - so here it is.
Band saw boxes are normally cut from laminated blocks, so my filament interpretation uses black PLA and ColorFabb Woodfill. I also had to change black filament spools mid print, hence the gloss and matt 'blacks'.
I've included two sets of drawers: with supports and without. Use whichever works for you.
Enjoy!
Printer brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
low res 0.4mm
Infill:
low infill
Notes:
Printed this with a 0.8mm nozzle @ 0.4mm layer height.
I wanted a 'rough-cut' look and it came out great!
http://twitter.com/francfalco
