由Alexander_3d创建的Print in Place Inline-3

模型来自
loading...
模型描述
3D model of turbo_sunshine
The models were repaired and checked for printability.

This is a print in place model, meaning there is no assembly...显示更多 required!

Important:
-Use 0.2mm layer height (or finer)
-Use a 0.4mm Nozzle (or finer)
-No Support
-No horizontal expansion compensation!

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20
https://www.instagram.com/sunshine_turbo
关于模型设计师
33 models uploaded
简介已审核