3D model of tomstanton
The models were repaired and checked for printability.
NOTE: this requires a CNC router
Frame hardware:
-3mm carbon fibre sheet (Main frame
...Показать больше
plates)
-20mm OD carbon tube (Arms/legs, pick length accordingly)
-24pcs M3x30 bolts (Motor mounts + leg mounts)
-16pcs M3 nuts
-16pcs M4x35 bolts (Frame bolts)
-16pc M4 nuts
Other hardware/electronics (that I used):
-4pcs Turnigy 4240 530kv motors
-4pcs 15x5.5 Carbon fibre props
-T-motor F55A 4in1 ESC
-Omnibus F4 V6 Flight Controller
-Frsky X8R (depends on you transmitter)
-Bn-880 GPS module
-2pcs 3s 5000mah (wired in series for 6s)
These lists don't include things like silicone wire, connectors, printer filament etc
https://www.instagram.com/tom__stanton
