3D model of tomstanton
The models were repaired and checked for printability.
Decided to try an aerodynamic fuselage for a radio controlled paramotor. Based around
...Показать больше
the new Hobbyking paramotor wing, which is far better than the old version. Don't worry about printing this with low infill to save weight as it flys better with more weight. Mine currently flys well at about 1.2kg. Some parts do require support.
Parts:
Wing - Hobbyking 2.4m
Motor - 2212 980kv
Propeller - Counter clockwise 9x6 (This is important for torque compensation)
ESC - T-motor 30A
Servos - 49g High Torque Servo
Batteries - Lipo 4s atleast 5000mah (I use 3x 4s 1800mah)
Radio control gear (atleast 3ch)
Bolts - 3x M3x20 (Attach front and back together)
10x M3x10 (Mount servos and hold arms to servos)
Magnets - 10x2mm circle magnets to attach canopy
And other building equipment such as solder, wire, chosen battery connectors etc
https://www.instagram.com/tom__stanton
