Animal Totem Wolf от santormae

Модель
loading...
Описание Модели
3D model of davision3d
The models were repaired and checked for printability.

A wolf head sculpted like it has been carved into wood and/or stone.

You have 3...Показать больше
options here:

Print it split with neck, head, teeth and eyes (eyes have a flat bottom) which works without support. It can be then connected with the connector bits or the optional screw.
Print only the head and eyes which works great for hanging it on a wall (of course also without support)
Print it as the full version which requires support. The teeth will be really problematic here so I recommend printing the split version.

The upper and lower teeth parts will require at least for the upper one glue or double sided tape to stay in place.

I printed mine in wood Pla and then put the pieces into a dark wood polish bath which already gives it a nice wood look. I did this like 3 times and after it dried painted the cavities with a more darker brown. For most of that I thinned the paint and let it run through the cavities. This also work nicely for giving it a dirty stone look if its printed in grey, white or even marble PLA. You can also sand in some scratches with a sanding tool as the last step.
http://twitter.com/TocoGamescom
Об авторе этой модели
24 models uploaded
Подтвержденный профиль