1:48 Queen Anne Chair から Tom_3dmodels

モデル制作者
loading...
Model Description
3D model of prettysmallthings. The models were repaired and checked for printability.

Even smaller than the original. Print for use in scale models, dollhouses or...さらに表示 just to show off your printing skills.

Printed on a Replicator with skeinforge 47 and acceleration turned off. Set "Extra Restart Distance to 0" under Dimension to print the small diameters in this design. I do not have an operational skeinforge 50 profile that prints small diameters reliably at any speed - I'd welcome any tips if you're able to do so.

The assembled version has small discs on the feet to help with adhesion, but I often use a raft in addition as well. I print these in multiples, always being careful to line them up in a column up the y axis, to keep the delicate columns out of the way of my second extruder.

I get about 50% breakage when printing the assembled version. The "easy print" version is a little more reliable 25% breakage & quicker print time.
@KacieHultgren
モデル制作者について
46 models uploaded
承認されたプロフィール