Logitech G29, G920, G27 Handbrake

Модель
Gravatar image
loading...
Описание Модели
2018 update:
Items needed:

- 16 mm aluminum tube (you have to drill it an 8 mm hole)
- V3 Microswitch SPDT 16a Micro Switch...Показать больше
(http://www.ebay.es/itm/V3-Microswitch-SPDT-16A-Micro-Switch/251827572523?hash=item3aa217cf2b:m:mONdUDFbmsgXjdcCSmAGbFg)
- Two bolts (3x30 mm) with 2 nuts.
- One bolt (8x50 mm) with 1 nut.
- One spring (i bought one from a chinese store, cut it and left 3 rings of it).
- One Digispark Usb ATTINY85 board (to emulate a key for our handbrake).
I bought this one: http://digistump.com/products/1 (from aliexpress).
- Two wires.

Tools needed:
-Soldering Iron: You'll have to solder the P0 pin and GND to your Switch.
-Dremel alike tool.
-Driller (to make an 8 mm hole to our tube).
-Micro usb cable.

Software needed:
-Arduino IDE (https://www.arduino.cc/en/main/software).
You'll have to install the trinket keyboard library's and the Attiny85 board drivers (because Arduino IDE have to recognise the board).
-Digistump digispark drivers (https://digistump.com/wiki/digispark/tutorials/connecting).
-Handbrake board code (this code enables the board to push the COMMA keyboard button mapped to our switch).
Handbrake code download: https://drive.google.com/file/d/1ueVhz8GHW2HozKdMkt_V-fGilqvFoX9U/view?usp=sharing

The attiny85 hardcase is optional. Also you can change the way you map your handbrake switch. In 2015 i used and old Usb Joystick, but this time i used an Arduino board clone).

Once you have completed your DIY handbrake you'll have to screw it to your shifter.
Об авторе этой модели
Gravatar image
No uploads
Подтвержденный профиль