In an effort to keep my Bowden tube as small as possible, to reduce filament play, I mounted the extruder to the top of the frame at halfway along the Y travel.
...Показать больше
This bracket allows a geared extruder to sit with the gear facing inwards and the adjustment facing outwards.
I have tested fitment with a [genuine E3D Titan](https://e3d-online.com/titan-extruder) and [AxMod's Drakon](https://www.thingiverse.com/thing:2172854), I also assume [Paciente's NSTT](https://www.thingiverse.com/thing:2090259) would fit as well. If not, OpenSCAD source is included so you can modify the `off` variable to move the motor out more.
The provided STL and the clear/white bracket in the photo is for the **right hand side** of the top of the frame. You could also mirror the model in your slicer to mount on the **left hand side** as shown in the photo of the red bracket.
The provided STL prints with a 3mm thickness between the motor and the extruder body. If you want a thicker bracket, modify the `mpt` variable.
